Publications
2024
Peer-reviewed journal article
Additive manufacturing of a new non-equiatomic high-entropy alloy with exceptional strength-ductility synergy via in-situ alloying
Yan, Shaohua; He, Xipei; Krüger, Manja; Li, Yusen; Jia, Qiang
In: Materials and design - Amsterdam [u.a.] : Elsevier Science, Bd. 238 (2024), Artikel 112676, insges. 11 S.
Peer-reviewed journal article
Thermodynamic properties of refractory Mo-Nb-V-Ti high entropy alloys (HEAs)
Bencze, László; Hasemann, Georg; Sergeev, Dmitry; Motalov, Vladimir; Müller, Michael G.; Krüger, Manja
In: Journal of alloys and compounds - Lausanne : Elsevier, Bd. 976 (2023), Artikel 173279, insges. 12 S.
Peer-reviewed journal article
Investigation of the equilibrium morphology of fcc [epsilon] − Cu in Fe-Cu alloys using a non-local Allen–Cahn model
Nizinkovskyi, Rostyslav; Halle, Thorsten; Krüger, Manja
In: Materials today / Communications - Amsterdam [u.a.] : Elsevier, Bd. 38 (2024), Artikel 107635, insges. 11 S.
Peer-reviewed journal article
Orientation-dependent hardness of Mo3Si studied by cube-corner nanoindentation
Yang, Weiguang; Hasemann, Georg; Schwaiger, Ruth; Krüger, Manja
In: Journal of materials science - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 59 (2024), S. 277-288
Peer-reviewed journal article
Effect of oxygen in Mo-TM (TM = Ti, Zr, Hf) solid solutions as studied with density functional theory calculations
Touzani, Rachid; Nizinkovskyi, Rostyslav; Krüger, Manja
In: Crystals - Basel : MDPI, Bd. 14 (2024), Heft 3, Artikel 213, insges. 13 S.
Peer-reviewed journal article
Improved creep resistance of Mo-V-Si-B alloys with a density below 8 g/cm³
Becker, Julia; Krüger, Manja
In: Intermetallics - Amsterdam [u.a.] : Elsevier Science, Bd. 169 (2024), Artikel 108277, insges. 7 S.
2023
Peer-reviewed journal article
Efficient sintering of Mo matrix composites - a study of temperature dependences and the use of the sinter additive Ni
Solodkyi, Ievgen; Petrusha, Vadym; Grigoroscuta, Mihai Alexandru; Schmelzer, Janett; Hasemann, Georg; Betke, Ulf; Badica, Petre; Krüger, Manja
In: Metals - Basel : MDPI, Bd. 13 (2023), Heft 10, Artikel 1715, insges. 15 S.
2022
Peer-reviewed journal article
Microstructure formation of cast and directionally solidified Mo-Ti-B alloys
Petrusha, Vadym; Hasemann, Georg; Touzani, Rachid Stefan; Bolbut, Volodymyr; Bogomol, Iurii; Krüger, Manja
In: Metals - Basel : MDPI, Bd. 12 (2022), Heft 6, Artikel 916, insges. 13 S.
Peer-reviewed journal article
Influence of elasticity on the morphology of fcc-Cu precipitates in Fe-Cu alloys - a phase-field study
Nizinkovskyi, Rostyslav; Halle, Thorsten; Krüger, Manja
In: Journal of nuclear materials - Amsterdam [u.a.]: Elsevier Science, Bd. 566 (2022)
Peer-reviewed journal article
Influence of a fine-grained surface structure on the tensile behaviour of a beta stabilised intermetallic γ-TiAl-based alloy
Stangl, Christoph; Kollmannsberger, Eva; Zimogliadova, Tatiana A.; Krüger, Manja; Saage, Holger
In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Bd. 146 (2022), insges. 11 S.
Peer-reviewed journal article
Ternary Vss-V3Si-V5SiB2 eutectic formation in the V-Si-B system
Yang, W. G.; Hasemann, Georg; Yazlak, M.; Gorr, B.; Schwaiger, Ruth; Krüger, Manja
In: Journal of alloys and compounds - Lausanne: Elsevier, Bd. 902 (2022)
Peer-reviewed journal article
High temperature oxidation performance of an additively manufactured Mo9Si8B alloy
Becker, Julia; Schmigalla, Sven; Schultze, Sabine; Rittinghaus, Silja-Katharina; Weisheit, Andreas; Schmelzer, Janett; Krüger, Manja
In: Oxidation of metals - Dordrecht [u.a.]: Springer Science + Business Media B.V, Bd. 97 (2022), S. 167-181
Peer-reviewed journal article
Enhanced fracture toughness and high-temperature strength of directionally solidified Mo-XC alloys
Becker, Julia; Breuer, Danio; Bogomol, Jurii; Krüger, Manja
In: Crystals - Basel: MDPI, Bd. 12 (2022), 11, insges. 8 S.
Peer-reviewed journal article
V 8SiB 4 - a new ternary phase in the V-Si-B system
Yang, W. G.; Touzani, Rachid Stefan; Hasemann, Georg; Yazlak, M.; Ziegner, M.; Gorr, B.; Schwaiger, R.; Krüger, Manja
In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Bd. 151 (2022), insges. 12 S.
Peer-reviewed journal article
Thermodynamic modelling of the V-Ti-B system
Yazlak, Mustafa; Christ, H.-J.; Yang, W.; Krüger, Manja; Hasemann, Georg; Gorr, B.
In: Calphad - Amsterdam [u.a.]: Elsevier Science, Bd. 79 (2022)
Peer-reviewed journal article
Microstructural modification of TiAl6V4 alloy to avoid detrimental effects due to selective in vivo crevice corrosion
Herbster, Maria; Harnisch, Karsten; Kriegel, Paulina; Heyn, Andreas; Krüger, Manja; Lohmann, Christoph H.; Bertrand, Jessica; Halle, Thorsten
In: Materials - Basel : MDPI, Bd. 15 (2022), Heft 16, Artikel 5733, insges. 26 S.
Peer-reviewed journal article
Refractory metal-based high entropy silicide-borides - the future of materials beyond MoSiB?
Galetz, M. C.; Ulrich, A. S.; Hasemann, Georg; Krüger, Manja
In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Bd. 148 (2022), insges. 1 S.
Dissertation
Microstructure and properties of powder metallurgical manufactured V-rich V-Si-B alloys for high-temperature application
Schmelzer, Janett; Krüger, Manja
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2022, 1 Online-Ressource (XVII, 124 Blätter, 8,23 MB) [Literaturverzeichnis: Blatt 112-124]
2021
Abstract
First principles density functional theory prediction of the crystal structure and the elastic properties of Mo2ZrB2 and Mo2HfB2
Touzani, Rachid Stefan; Krüger, Manja
In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 94-95
Abstract
Ternary Vss-V3Si-V5SiB2 eutectic reaction in V-SiB system
Yang, Weiguang; Hasemann, Georg; Yazlak, Mustafa; Gorr, Bronislava; Schwaiger, Ruth; Krüger, Manja
In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 165-166
Abstract
Biocompatibility of pure refractory metals and their combination as high entropy alloys
Schmelzer, Janett; Hasemann, Georg; Regenberg, Maximilian; Betke, Ulf; Krüger, Manja; Walles, Heike; Scheffler, Michael
In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 172-173
Abstract
High-energy synchrotron X-ray in situ observation of ternary eutectic growth in a directionally solidified Mo-Si-B alloy
Hasemann, Georg; Zhu, Linye; Hauschildt, Katja; Blankenburg, Malte; Ida, Shuntaro; Pyczak, Florian; Yoshimi, Kyosuke; Krüger, Manja
In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 55-56
Abstract
Microstructure and mechanical properties of a γ-TiAl alloy with a nano-grained surface layer
Stangl, Christoph; Krüger, Manja; Saage, Holger
In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 90-91
Abstract
Particle strengthening of additively manufactured Me-SiB (Me = Mo, V) alloys
Schmelzer, Janett; Rittinghaus, Silja-Katharina; Wilms, Markus B.; Michael, Oliver; Krüger, Manja
In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 59-60
Abstract
A novel alloy development approach - biomedical high-entropy alloys
Regenberg, Maximilian; Schmelzer, Janett; Hasemann, Georg; Krüger, Manja
In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 109-110
Peer-reviewed journal article
A novel alloy development approach - biomedical equiatomic Ta-Nb-Ti alloy
Regenberg, Maximilian; Schmelzer, Janett; Hasemann, Georg; Bertrand, Jessica; Krüger, Manja
In: Metals - Basel : MDPI, Bd. 11 (2021), Heft 11, Artikel 1778, insges. 12 S.
Peer-reviewed journal article
Temperature resistance of Mo3Si - phase stability, microhardness, and creep properties
Kauss, Olha; Obert, Susanne; Bogomol, Iurii; Wablat, Thomas; Siemensmeyer, Nils; Naumenko, Konstantin; Krüger, Manja
In: Metals - Basel: MDPI, Bd. 11 (2021), 4, insges. 17 S.
Peer-reviewed journal article
Microstructure evolution and sequence of phase transition reactions through the solidification of Mo-Si-B alloy - a phase-field study
Kazemi, Omid; Hasemann, Georg; Krüger, Manja; Halle, Thorsten
In: Computational materials science - Amsterdam [u.a.]: Elsevier Science, Bd. 193 (2021), S. 1-7
Peer-reviewed journal article
Microstructural characterization of arc-melted and directionally solidified near-eutectic molybdenum-silicon-boron alloys
Zhu, Linye; Ida, Shuntaro; Hasemann, Georg; Krüger, Manja; Yoshimi, Kyosuke
In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, 132 (2021), Artikel 107131, insgesamt 9 Seiten
Peer-reviewed journal article
Additive manufacturing of a near-eutectic MoSiB alloy - processing and resulting properties
Fichtner, D.; Schmelzer, Janett; Yang, W.; Heinze, C.; Krüger, Manja
In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, 128 (2021), Artikel 107025
Peer-reviewed journal article
Mo-silicide alloys for high-temperature structural applications
Perepezko, J. H.; Krüger, Manja; Heilmaier, M.
In: Materials Performance and Characterization - West Conshohocken, Pa.: ASTM International, Bd. 10 (2021), 2, S. 122-145
Peer-reviewed journal article
Synthesis of a lubricant to mimic the biorheological behavior of osteoarthritic and revision synovial fluid
Herbster, Maria; Nizinkovskyi, Rostyslav; Bollmann, Miriam; Bartel, Dirk; Lohmann, Christoph H.; Krüger, Manja; Halle, Thorsten; Bertrand, Jessica
In: Lubricants - Basel : MDPI, Bd. 9 (2021), Heft 9, Artikel 87, insges. 20 S.
Peer-reviewed journal article
Strengthening of additively manufactured Me-Si-B (Me = Mo, V) by Y2O3 particles
Schmelzer, Janett; Rittinghaus, Silja-Katharina; Wilms, Markus B.; Michael, Oliver; Krüger, Manja
In: International journal of refractory metals & hard materials - Amsterdam [u.a.]: Elsevier Science, Bd. 101 (2021)
Peer-reviewed journal article
Refractory metal coated alumina foams as support material for stem cell and fibroblasts cultivation
Hasemann, Georg; Betke, Ulf; Krüger, Manja; Walles, Heike; Scheffler, Michael
In: Materials - Basel: MDPI, Bd. 14 (2021), Heft 11, Artikel 2813
Peer-reviewed journal article
Oxidation-resistant environmental barrier coatings for Mobased alloys - a review
Gatzen, Caren; Smokovych, Iryna; Scheffler, Michael; Krüger, Manja
In: Advanced engineering materials - Weinheim: Wiley-VCH Verl., Bd. 23 (2021), 4
Peer-reviewed journal article
In situ observation of ternary eutectic growth in a directionally solidified MoSiB alloy using highenergy synchrotron Xrays
Hasemann, Georg; Zhu, Linye; Hauschildt, Katja; Blankenburg, Malte; Ida, Schuntaro; Pyczak, Florian; Yoshimi, Kyosuke; Krüger, Manja
In: Advanced engineering materials - Weinheim: Wiley-VCH Verl., Bd. 23 (2021), 11, insges. 9 S.
Editor
Intermetallics 2021 - International Conference, 04-08 October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts
Krüger, Manja
In: Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021, 1 Online-Ressource (206 Seiten), IllustrationenKongress: Intermetallics 5 (Bad Staffelstein : 2021.10.04-08)
2020
Book chapter
Deformation twinning in bcc iron - experimental investigation of twin formation assisted by molecular dynamics simulation
Ecke, Martin; Michael, Oliver; Wilke, Markus; Hütter, Sebastian; Krüger, Manja; Halle, Thorsten
In: Plasticity, damage and fracture in advanced materials - Cham : Springer ; Altenbach, Holm . - 2020, S. 43-51 - ( Advanced structured materials; 121)
Book chapter
Structural analysis of gas turbine blades made of Mo-Si-B under stationary thermo-mechanical loads
Kauss, Olha; Naumenko, Konstantin; Hasemann, Georg; Krüger, Manja
In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2020, S. 79-91 - (Advanced structured materials; 117)
Peer-reviewed journal article
Microstructure-property relations of eutectic V-Si and V-B alloys
Regenberg, Maximilian; Hasemann, Georg; Müller, Christopher; Krüger, Manja
In: IOP conference series / Institute of Physics - London [u.a.] : Institute of Physics - Vol. 882 (2020), Paper 012014, insgesamt 12 Seiten
Peer-reviewed journal article
Microstructure evolution and mechanical properties of refractory Mo-Nb-V-W-Ti high-entropy alloys
Regenberg, Maximilian; Hasemann, Georg; Wilke, Markus; Halle, Thorsten; Krüger, Manja
In: Metals - Basel: MDPI, Vol. 10 (2020), 11, Article 1530, insgesamt 13 Seiten
Peer-reviewed journal article
Polymer derived ceramics from Si, B, SiB6, and Mo5SiB2 filler-loaded perhydropolysilazane precursors as protective and functional coatings for refractory metal alloys
Smokovych, Iryna; Gatzen, Caren; Krüger, Manja; Schwidder, Michael; Scheffler, Michael
In: Materials - Basel: MDPI, Vol. 13 (2020), 21, Article 4878, insgesamt 11 Seiten
Peer-reviewed journal article
Phase and microstructural characterizations for Ce 0.8 Gd 0.2 O 2- -FeCo 2 O 4 dual phase oxygen transport membranes
Zeng, Fanlin; Malzbender, Jürgen; Baumann, Stefan; Krüger, Manja; Winnubst, Louis; Guillon, Olivier; Meulenberg, Wilhelm A.
In: Journal of the European Ceramic Society/ European Ceramic Society - Amsterdam [u.a.]: Elsevier Science, Bd. 40.2020, 15, S. 5646-5652
Peer-reviewed journal article
First principles density functional theory prediction of the crystal structure and the elastic properties of Mo 2ZrB 2 and Mo 2HfB 2
Touzani, Rachid Stefan; Krüger, Manja
In: Crystals - Basel: MDPI, Volume 10 (2020), issue 10, article 865, 14 Seiten
Peer-reviewed journal article
Coating reactions on vanadium and V-Si-B Alloys during powder pack-cementation
Hasemann, Georg; Harris, Chad; Krüger, Manja; Perepezko, John H.
In: Materials - Basel: MDPI, Volume 13 (2020), issue 18, article 4099, 7 Seiten
Peer-reviewed journal article
A zone melting device for the in situ observation of directional solidification using high-energy synchrotron x rays
Gombola, C.; Hasemann, Georg; Kauffmann, A.; Sprenger, I.; Laube, S.; Schmitt, A.; Gang, F.; Bolbut, Volodymyr; Oehring, M.; Blankenburg, M.; Schell, N.; Staron, P.; Pyczak, F.; Krüger, Manja; Heilmaier, M.
In: Review of scientific instruments - [S.l.] : American Institute of Physics - Volume 91 (2020), issue 9, article 093901, 10 Seiten
Peer-reviewed journal article
Influence of Nb, Ti and Mo on microstructure and mechanical properties of vanadium solid solutions
Müller, Christopher; Touzani, Rachid S.; Betke, Ulf; Krüger, Manja
In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), 012012, insgesamt 10 Seiten[ Symposium: Symposium on Materials and Joining Technology, Magdeburg, Germany, 7-8 September 2020]
Peer-reviewed journal article
Recent advances in additive manufacturing of Mo-Si-B alloys - a status report onthe cooperative project LextrA
Krüger, Manja; Schmelzer, Janett; Fichtner, D.; Heinze, C.; Küsters, Y.; Rittinghaus, S. K.; Weisheit, A.; Heinz, R.; Gerking, L.; Gruber, K; Schmigalla, S.; Schulze, S.
In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), Paper 012011, insgesamt 9 Seiten[ Symposium: Symposium on Materials and Joining Technology, Magdeburg, Germany, 7-8 September 2020]
Peer-reviewed journal article
Oxidation response of additively manufactured eutectic Mo-Si-B alloys
Becker, Julia; Fichtner, D.; Schmigalla, S.; Schultze, S.; Heinze, C.; Küsters, Y.; Hasemann, Georg; Schmelzer, Janett; Krüger, Manja
In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), Paper 012002, insgesamt 9 Seiten[Symposium: Symposium on Materials and Joining Technology, Magdeburg, Germany, 7-8 September 2020]
Peer-reviewed journal article
The effects of Zr and La2O3 additions on the microstructural and mechanical properties of a Mo-6Si-5B alloy
Becker, Julia; Giese, Marcel; Krüger, Manja
In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), Paper 012001, insgesamt 7 Seiten[Symposium: Symposium on Materials and Joining Technology, Magdeburg, Germany, 7-8 September 2020]
Peer-reviewed journal article
First principles density functional theory calculations on the elastic properties of Mo-Si based solid solutions
Touzani, Rachid; Krüger, Manja
In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), Paper 012024, insgesamt 10 Seiten[Symposium: Symposium on Materials and Joining Technology, Magdeburg, Germany, 7-8 September 2020]
Peer-reviewed journal article
Fracture toughness of single grains and polycrystalline Li7La3Zr2O12 electrolyte material based on a pillar splitting method
Nonemacher, Juliane Franciele; Arinichevab, Yulia; Yan, Gang; Finsterbusch, Martin; Krüger, Manja; Malzbender, Jürgen
In: Journal of the European Ceramic Society/ European Ceramic Society - Amsterdam [u.a.]: Elsevier Science, Bd. 40.2020, 8, S. 3057-3064
Peer-reviewed journal article
Printability and microstructural evolution of a near-eutectic three-phase V-based alloy
Schmelzer, Janett; Rittinghaus, Silja-Katharina; Gruber, Karl; Veit, Peter; Weisheit, Andreas; Krüger, Manja
In: Additive manufacturing - Amsterdam [u.a.]: Elsevier, Vol. 34 (2020), Artikelnummer 101208
Peer-reviewed journal article
Microstructure and compression properties of VSSV3B2 eutectic alloys in the V-Si-B system
Müller, Christopher; Hasemann, Georg; Regenberg, Maximilian; Betke, Ulf; Krüger, Manja
In: Materials - Basel: MDPI, Volume 13 (2020), issue 9, article 2100, 12 Seiten
Peer-reviewed journal article
Micromechanical characterization of Ce0.8Gd0.2O2FeCo2O4 dual phase oxygen transport membranes
Zeng, Fanlin; Malzbender, Jürgen; Baumann, Stefan; Schulze-Küppers, Falk; Krüger, Manja; Nijmeijer, Arian; Guillon, Olivier; Meulenberg, Wilhelm Albert
In: Advanced engineering materials - Weinheim: Wiley-VCH Verl., Bd. 22 (2020), 6
Dissertation
Failure analysis of coatings under thermo-mechanical loading
Nordmann, Joachim; Altenbach, Holm; Krüger, Manja
In: Magdeburg, 2020, xv, 110 Seiten, A1-A6, B1-B6, Illustrationen, Diagramme, 30 cm
Peer-reviewed journal article
Preceramic polymer-derived ceramic foams with lamellar strut porosity
Dammler, Kathleen; Schelm, Katja; Kniep, D.; Hasemann, Georg; Scheffler, Michael
In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), Paper 012005, insgesamt 12 Seiten
Peer-reviewed journal article
Manufacturing of open-cell metal foams by the sponge replication technique
Sutygina, Alina; Betke, Ulf; Hasemann, Georg; Scheffler, Michael
In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), Paper 012022, insgesamt 11 Seiten[Symposium: Symposium on Materials and Joining Technology, Magdeburg, Germany, 7-8 September 2020]
Peer-reviewed journal article
Experimental study of the liquidus surface in the V-rich portion of the V-Si-B system
Hasemann, Georg
In: Journal of alloys and compounds: JAL ; an interdisciplinary journal of materials science and solid-state chemistry and physics - Lausanne: Elsevier, Volume 824 (2020), Artikel 153843
2019
Abstract
Alloying effects in vanadium solid solutions
Müller, Christopher; Hasemann, Georg; Krüger, Manja
In: Beyond Nickel-Based Superalloys III: Nara, Japan, Jun 11-14, 2019 : program - Kyoto University, 2019 . - 2019
Abstract
Microstructure-property relationship of vanadium solid solutions, two-phase and three-phase alloys
Müller, Christopher; Hasemann, Georg; Krüger, Manja
In: 2018 MRS Fall meeting & exhibit - Materials Research Society, 2018, 2018, ID PM06.04.07
Abstract
Alloying effects in vanadium solid solutions
Müller, Christopher; Hasemann, Georg; Krüger, Manja
In: Intermetallics 2019 - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2019; Heilmaier, Martin, 2019, Poster-ID: p-28, Seite 214
Book chapter
Effects of second phases in Mo-Zr Alloys - a study on phase evolution and mechanical properties
Becker, Julia; Siems, Heiko F.; Krüger, Manja
In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2019, S. 93-105
Peer-reviewed journal article
Structural analysis of gas turbine blades made of Mo-Si-B under transient thermo-mechanical loads
Kauss, Olha; Tsybenko, H.; Naumenko, Konstantin; Hütter, Sebastian; Krüger, Manja
In: Computational materials science - Amsterdam [u.a.]: Elsevier Science, Bd. 165 (2019), S. 129-136
Peer-reviewed journal article
Structure formation and mechanical properties of the high-entropy AlCuNiFeCr alloy prepared by mechanical alloying and spark plasma
Yurkova, A. I.; Cherniavsky, V. V.; Bolbut, Volodymyr; Krüger, Manja; Bogomol, Iurii
In: Journal of alloys and compounds - Lausanne: Elsevier, Bd. 786 (2019), S. 139-148
Peer-reviewed journal article
Addition of carbon fibers into B4C infiltrated with molten silicon
Solodkyi, I.; Bezdorozhev, O.; Vterkovskiy, M.; Bogomol, Iurii; Bolbut, Volodymyr; Krüger, Manja; Badica, P.; Loboda, P.
In: Ceramics international - Amsterdam [u.a.]: Elsevier Science, Bd. 45 (2019), 1, S. 168-174
Peer-reviewed journal article
Site preference of V and its influence on the elastic properties in the boride series VxMo5-xSiB2 as studied by first principles density functional theory
Touzani, Rachid Stefan; Becker, Julia; Krüger, Manja
In: Journal of alloys and compounds: JAL ; an interdisciplinary journal of materials science and solid-state chemistry and physics - Lausanne: Elsevier . - 2019
Peer-reviewed journal article
Experimental assessment of the microstructure evolution and liquidus projection in the Mo-rich Mo-Si-B system
Hasemann, Georg; Ida, S.; Zhu, L.; Iizawa, T.; Yoshimi, K.; Krüger, Manja
In: Materials and design - Amsterdam [u.a.]: Elsevier Science, Vol. 185 (2020), Artikel 108233, insgesamt 13 Seiten
Peer-reviewed journal article
Polymer derived ceramic materials from Si, B and MoSiB filler-loaded Perhydropolysilazane Precursor for oxidation protection
Smokovych, Iryna; Krüger, Manja; Scheffler, Michael
In: Journal of the European Ceramic Society - Amsterdam [u.a.]: Elsevier Science, Bd. 39 (2019), 8, S. 3634-3642
Peer-reviewed journal article
Controversial discussion on the existence of the Hf and Zr monoborides and experimental proof by atom probe tomography
Bolbut, Volodymyr; Seils, S.; Boll, T.; Chassaing, D.; Krüger, Manja
In: Materialia - Amsterdam: Elsevier, Vol. 6 (2019), Artikel 100322
Peer-reviewed journal article
Processing of Mo silicide powders as filler particles in polymer-derived ceramic coatings for Mo-Si-B substrates
Krüger, Manja; Schmelzer, Janett; Smokovych, Irina; Lopez Barillao, Jennifer; Hasemann, Georg
In: Powder technology - Amsterdam [u.a.]: Elsevier Science, Bd. 352 (2019), S. 381-385
Peer-reviewed journal article
Microstructure and cyclic oxidation behavior of APS TBC systems drilled with various laser methods
Ebrahimzade, V.; Uchtmann, H.; Singheiser, L.; Krüger, Manja; Malzbender, J.
In: Surface and coatings technology - Amsterdam [u.a.] : Elsevier Science - Vol. 383 (2020), Artikelnr. 125018
Peer-reviewed journal article
Anisotropy of the mechanical properties of Li1·3Al0·3Ti1·7(PO4)3 solid electrolyte material
Yan, Gang; Yu, Shicheng; Yang, Weiguang; Li, Xiaoqiang; Tempel, Hermann; Kungl, Hans; Eichel, Rüdiger-A.; Krüger, Manja; Malzbender, Jürgen
In: Journal of power sources: the international journal on the science and technology of electrochemical energy systems - New York, NY [u.a.]: Elsevier, Vol. 437 (2019), Artikel 226940
Peer-reviewed journal article
The potential of mechanical alloying to improve the strength and ductility of Mo-9Si-8B-1Zr alloys - experiments and simulation
Krüger, Manja; Kauss, Olha; Naumenko, Konstantin; Burmeister, C.; Wessel, E.; Schmelzer, Janett
In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Vol. 113 (2019), Artikel 106558
Peer-reviewed journal article
Tailored oxidation barrier coatings for Mo-Hf-B and Mo-Zr-B alloys
Smokovych, Iryna; Bolbut, Volodymyr; Krüger, Manja; Scheffler, Michael
In: Materials - Basel: MDPI, Volume 12 (2019), issue 14, article 2215, insgesamt 13 Seiten
Peer-reviewed journal article
Room temperature plastic deformability in V-rich VSiB alloys
Hasemann, Georg; Müller, Christopher; Grüner, D.; Wessel, E.; Krüger, Manja
In: Acta materialia - Amsterdam [u.a.]: Elsevier Science, Bd. 175 (2019), S. 140-147
Dissertation
Development and implementation of a cyclic plasticity model with thermal softening for hot work tool steel
Jilg, Andreas; Altenbach, Holm; Krüger, Manja
In: Magdeburg, 2019, X, 104 Seiten, Illustrationen, Diagramme, 21 cm
Dissertation
Development of density reduced Mo-Si-B alloys
Becker, Julia; Krüger, Manja; Skrotzki, Birgit
In: Barleben: docupoint Verlag, 2020, XVI, 117 Seiten, Illustrationen, Diagramme, 21 cm - (docupoint Wissenschaft; Micro-macro transactions; Volume 36)
Editor
Advances in mechanics of high-temperature materials
Naumenko, Konstantin; Krüger, Manja
In: Cham: Springer, 2019, 1 Online-Ressource - (Advanced structured materials; 117), ISBN: 978-3-030-23869-8
Article in conference proceedings
Laser additive manufacturing of intermetallic alloys for high-temperature applications
Rittinghaus, Silja-Katharina; Schmelzer, Janett; Wilms, Markus B.; Krüger, Manja
In: Industrial perspectives in additive technologies - Örebro, Sweden; The Austrian Society for Metallurgy and Materials . - 2019, S. 110-117
2018
Peer-reviewed journal article
Phase stability and temperature-dependent compressive strength of a low-density Fe 32.3Al 29.3Cu 11.7Ni 10.8Ti 15.9 alloy
Bolbut, Volodymyr; Wessel, Egbert; Krüger, Manja
In: Scripta materialia- Amsterdam [u.a.]: Elsevier Science, 1996, Bd. 150.2018, S. 54-56
Peer-reviewed journal article
Microstructure and mechanical properties of a directionally solidified Mo-12Hf-24B alloy
Bolbut, Volodymyr; Bogomol, Iurii; Loboda, P.; Krüger, Manja
In: Journal of alloys and compounds- Lausanne: Elsevier, 1991, Bd. 735.2018, S. 2324-2330
Peer-reviewed journal article
Vacancy effects on the mechanical behavior of B2-FeAl intermetallics
Zamanzade, M.; Hasemann, Georg; Motz, C.; Krüger, Manja; Barnoush, A.
In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 712.2018, S. 88-96
Peer-reviewed journal article
Alloying effects in Mo-5X (X=Zr, Ti,V) Microstructural modifications and mechanical properties
Becker, Julia; Betke, Ulf; Wessel, Egbert; Krüger, Manja
In: Materials today / Communications - Amsterdam [u.a.]: Elsevier, 2014, Bd. 15.2018, S. 314-321
Peer-reviewed journal article
Analysis of iron aluminide coated beams under creep conditions in high-temperature four-point bending tests
Nordmann, Joachim; Thiem, Philipp; Cinca, Nuria; Naumenko, Konstantin; Krüger, Manja
In: The journal of strain analysis for engineering design : JSA - London : Sage Publ., Bd. 53.2018, 4, S. 255-265
Peer-reviewed journal article
Printability of gas atomized Mo-Si-B powders by laser metal deposition
Schmelzer, Janett; Rittinghaus, S.-K.; Weisheit, A.; Stobik, M.; Paulus, J.; Gruber, K.; Wessel, E.; Heinze, C.; Krüger, Manja
In: International journal of refractory metals & hard materials - Amsterdam [u.a.]: Elsevier Science, Bd. 78.2019, S. 123-126, 2018[Online first]
Peer-reviewed journal article
Prediction of thermodynamic properties of Mo-Si-B alloys from first-principles calculations
Hütter, Sebastian; Hasemann, Georg; Al-Karawi, J.; Krüger, Manja; Halle, Thorsten
In: Metallurgical and materials transactions / A - Boston: Springer, Bd. 49.2018, 12, S. 6075-6083
Peer-reviewed journal article
Density reduction of Mo-Si-B alloys by vanadium alloying
Becker, Julia; Betke, Ulf; Hoffmeister, Michael; Krüger, Manja
In: JOM: a publication of the Minerals, Metals & Materials Society (TMS) - New York, NY: Springer Science + Business Media, 1989, Bd. 70.2018, 11, S. 2574-2581
Peer-reviewed journal article
Microstructures of ternary eutectic refractory Me-Si-B (Me = Mo, V) alloy systems
Hasemann, Georg; Krüger, Manja; Palm, Martin; Stein, Frank
In: Materials science forum - Uetikon: Trans Tech Publ., Bd. 941.2018, S. 827-832
Dissertation
Modeling inelastic behaviour of Al-rich Ti-Al alloys at ultra-high homologous temperature
Chowdhury, Helal; Naumenko, Konstantin; Krüger, Manja
In: Barleben: docupoint Verlag, 2018, 153 Seiten, Illustrationen, Diagramme - (Docupoint Wissenschaft; Micro-macro transactions; Volume 30)
Dissertation
Development of Mo-Hf-B and Mo-Zr-B alloys for high-temperature application
Bolbut, Volodymyr; Krüger, Manja; Halle, Thorsten
In: Magdeburg, 2018, XIV, 82 Blätter, Illustrationen, 30 cm[Literaturverzeichnis: Blatt 76-82]
Article in conference proceedings
Additive Fertigung gasverdüster Mo-Si-B Pulver durch Laserauftragsschweißen
Schmelzer, Janett; Rittinghaus, S.-K.; Weisheit, A.; Stobik, M.; Paulus, J.; Gruber, K.; Wessel, E.; Krüger, Manja; Heinze, C.
In: Fachtagung Werkstoffe und Additive Fertigung: 25.-26.04.2018, Potsdam : Tagungsband - Sankt Augustin: Deutsche Gesellschaft für Materialkunde e. V., S. 244-249[Konferenz: DGM-Tagung, 25.-26. April 2018, Potsdam]
2017
Abstract
Formation of silicides in mechanically alloyed V-Si solid solution powders
Schmelzer, Janett; Günther, Christoph Daniel; Krüger, Manja
In: Intermetallics 2017 - Bad Staffelstein: Educational Center Kloster Banz, 2017, S. 117-118[Konferenz: Intermetallics 2017]
Abstract
Microstructure and creep properties of near-eutectic Mo-Zr-B and Mo-Hf-B alloys
Bolbut, Volodymyr; Krüger, Manja
In: Intermetallics 2017 - Bad Staffelstein: Educational Center Kloster Banz, 2017, S. 119-120[Konferenz: Intermetallics 2017]
Abstract
Alloy design and microstructure of refractory Mo-V-Nb-W-Tix HEAs
Hasemann, Georg; Wilke, Markus; Halle, Thorsten; Krüger, Manja
In: Intermetallics 2017 - Bad Staffelstein: Educational Center Kloster Banz, 2017, S. 97-98[Konferenz: Intermetallics 2017]
Abstract
Creep properties of the Mo3Si and Mo5SiB2 phases in the Mo-Si-B alloy system
Popovych, Olha; Bogomol, Iurii; Naumenko, Konstantin; Krüger, Manja
In: Konferenz: Intermetallics 2017, Intermetallics 2017 - Bad Staffelstein : Educational Center Kloster Banz, S. 115-116
Other materials
Innovative metallische Hochtemperaturwerkstoffe
Krüger, Manja; Halle, Thorsten
In: Magdeburg, 2017, 147 Seiten, Illustrationen, Diagramme, 30 cm[Es handelt sich um eine kumulative Schrift, die aus Artikeln und einem vorangestellten Beitrag besteht.; Literaturverzeichnis: Seite 47-60]
Book chapter
Der Einfluss der Legierungselemente Ti, V und Zr auf die mechanischen Eigenschaften des Mo-Mischkristalls
Becker, Julia; Krüger, Manja
In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg, 08. und 09. September 2017: Magdeburg, 08. und 09. September 2017/ Sommerkurs Werkstoffe und Fügen - Magdeburg: Universitätsbibliothek; Mook, Gerhard . - 2017, S. 169-178
Book chapter
Gerichtet erstarrte Mo-Zr-B- und Mo-Hf-B-Legierungen
Bolbut, Volodymyr; Bogomol, Iurii; Krüger, Manja
In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg: Universitätsbibliothek, 2017, S. 179-184
Book chapter
Bildung von Siliziden in mechanisch legierten V-Si Mischkristallpulvern
Schmelzer, Janett; Baumann, Torben; Dieck, Sebastian; Krüger, Manja
In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg: Universitätsbibliothek, 2017, S. 161-168
Book chapter
Kriechen von Mo-Si-B-Legierungen und Simulation der Kriechverformung von Turbinenschaufeln
Popovych, Olha; Naumenko, Konstantin; Krüger, Manja
In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg, 08. und 09. September 2017 , korrigierte Auflage - Magdeburg : Universitätsbibliothek, S. 185-192
Peer-reviewed journal article
Process-oriented microstructure evolution of V SS-V 3Si-V 5SiB 2 materials
Krüger, Manja; Köppe-Grabow, Birte
In: Practical metallography: preparation, imaging and analysis of microstructures - München: Hanser, Bd. 54.2017, 5, S. 293-307[Online unter:
Peer-reviewed journal article
Gerichtet erstarrte Mo-Zr-B-Legierungen
Bolbut, Volodymyr; Bogomol, Iurii; Bauer, C.; Krüger, Manja
In: Materials science and engineering technology - Weinheim: Wiley-VCH, 1970, Bd. 48.2017, S. 1113-1124
Peer-reviewed journal article
Critical stresses estimation by crystal viscoplasticity modeling of rate-dependent anisotropy of Al-rich TiAl alloys at high temperature
Chowdhury, Helal; Naumenko, Konstantin; Altenbach, Holm; Krüger, Manja
In: Archive of applied mechanics - Berlin: Springer, insges. 17 S., 2017
Peer-reviewed journal article
Reviewing the class of Al-rich Ti-Al alloys - modeling high temperature plastic anisotropy and asymmetry
Chowdhury, Helal; Altenbach, Holm; Krüger, Manja; Naumenko, Konstantin
In: Mechanics of advanced materials and modern processes - Berlin: Springer, 2015, Bd. 3.2017, insges. 20 S.
Peer-reviewed journal article
Rate dependent tension-compression-asymmetry of Ti-61.8at%Al alloy with long period superstructures at 1050 °C
Chowdhury, Helal; Naumenko, Konstantin; Altenbach, Holm; Krüger, Manja
In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 700.2017, S. 503-511
Peer-reviewed journal article
Prediction of phase distribution pattern in phase field simulations on Mo 5SiB 2-primary areas in near eutectic Mo-Si-B alloy
Kazemi, 0.; Hasemann, G.; Krüger, Manja; Halle, Thorsten
In: IOP conference series / Materials science and engineering - London [u.a.]: Institute of Physics, 2009, Vol. 181.2017, Art. 012033, insgesamt 7 S.[Kongress: 19th Chemnitz Seminar on Materials Engineering,16./17. March 2017, Chemnitz, Germany]
Peer-reviewed journal article
Polymer derived oxidation barrier coatings for Mo-Si-B alloys
Smokovych, Iryna; Hasemann, Georg; Krüger, Manja; Scheffler, Michael
In: Journal of the European Ceramic Society - Amsterdam [u.a.] : Elsevier Science, Bd. 37 (2017), Heft 15, S. 4559-4565
Peer-reviewed journal article
Comparison of microstructure and adhesion strength of plasma, flame and high velocity oxy-fuel sprayed coatings from an iron aluminide powder
Thiem, Philipp G.; Chornyi, A.; Smirnov, L. V.; Krüger, Manja
In: Surface and coatings technology - Amsterdam [u.a.]: Elsevier Science, 1986, Bd. 324.2017, S. 498-508
Dissertation
Microstructure and properties of near-eutectic Mo-Si-B alloys for high temperature applications
Hasemann, Georg; Krüger, Manja
In: Aachen, Shaker Verlag, 2017, XIV, 90 Seiten, 27 Illustrationen, Diagramme, 21 cm, 158 g - (Berichte aus der Werkstofftechnik), ISBN 978-3-8440-5408-8[Literaturverzeichnis: Seite 77-88]
Dissertation
Einfluss der Oberflächenmodifizierung auf die Fließeigenschaften von kohäsiven Schüttgütern
Todorova, Zinaida Ivanova; Scheffler, Franziska; Krüger, Manja
In: Barleben: docupoint Verlag, 2017, X, 136 Seiten, Illustrationen, Diagramme - (Docupoint Wissenschaft; Micro-macro transactions; Volume 29)
Book chapter
Entwicklung von High-Entropy-Legierung auf Refraktärmetallbasis
Hellriegel, M.; Wilke, Markus; Hasemann, G.; Halle, Thorsten
In: 16. Sommerkurs Werkstoffe und Fügen: Magdeburg, 08. und 09. September 2017 - Magdeburg: Universitätsbibliothek, S. 113-118
2016
Peer-reviewed journal article
Near-eutectic ternary Mo-Si-B alloys - microstructures and creep properties
Hasemann, Georg; Kaplunenko, D.; Bogomol, Iurii; Krüger, Manja
In: JOM: a publication of the Minerals, Metals & Materials Society (TMS) - New York, NY: Springer Science + Business Media, Bd. 68.2016, 11, S. 2847-2853
Peer-reviewed journal article
Microstructure evolution of a directionally solidified ternary eutectic Mo-Si-B alloy
Krüger, Manja; Hasemann, Georg; Kazemi, Omid; Halle, Thorsten
In: Materials science forum - Baech: Trans Tech Publications Ltd., Bd. 879 (2016), S. 1226-1232
Peer-reviewed journal article
Structure and Properties of Directionally Solidified Mo-8.7 Si-18 B Alloys
Bogomol, Iurii; Popovych, Olha; Krüger, Manja; Loboda, Petro
In: Research Bulletin of the National Technical University of Ukraine "Kyiv Politechnic Institute", Kyiv Politechnic Institute, 2016, Bd. 0, Heft 2, S. 69
Peer-reviewed journal article
Microstructure variations and creep properties of novel high temperature V-Si-B materials
Krüger, Manja; Bolbut, Volodymyr; Gang, Florian; Hasemann, Georg
In: JOM - New York, NY: Springer Science + Business Media, Bd. 68 (2016), 11, S. 2811-2816
Peer-reviewed journal article
Similarities and differences in mechanical alloying processes of V-Si-B and Mo-Si-B powders
Krüger, Manja; Schmelzer, Janett; Helmecke, Maria
In: Metals: open access journal - Basel: MDPI, 2011, Vol. 6.2016, 10, Art. 241, insgesamt 16 S.
Peer-reviewed journal article
High temperature compression strength and oxidation of a V-9Si-13B alloy
Krüger, Manja
In: Scripta materialia - Amsterdam [u.a.]: Elsevier Science, Bd. 121.2016, S. 75-78
Peer-reviewed journal article
Phase field simulation of a directional solidification of a ternary eutectic Mo-Si-B Alloy
Kazemi, O.; Hasemann, Georg; Krüger, Manja; Halle, Thorsten
In: IOP conference series / Materials science and engineering - London [u.a.]: Institute of Physics, Vol. 118.2016, 1, Art. 012028, insgesamt 9 S.[18th Chemnitz Seminar on Materials Engineering]
Peer-reviewed journal article
Hardening of VSi alloys during high energy ball milling
Schmelzer, Janett; Baumann, Torben; Dieck, Sebastian; Krüger, Manja
In: Powder technology - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 294.2016, S. 493-497
Non-peer-reviewed journal article
Struktura i vlastivosti sprjamovano zakristalizovanogo splavu sistemi Mo-8,7 Si-18 B
Bogomol, Iurii; Popovych, Olha; Hasemann, Georg; Krüger, Manja; Loboda, P. I.
In: Naukovi visti Nacional'noho Techninoho Universytetu Ukraïny Kyïvs'kyj Politechninyj Instytut: naukovo-techninyj urnal - Kyïv, 2, S. 69-76, 2016
2015
Peer-reviewed journal article
Finite element simulation of lamellar coppersilver composites
Dodla, Srihari; Bertram, Albrecht; Krüger, Manja
In: Computational materials science - Amsterdam [u.a.]: Elsevier Science, 1992, Bd. 101.2015, S. 29-38
Peer-reviewed journal article
Simulation of flow behavior and texture evolution of Cu-Ag composites incorporating XRD data
Dodla, Srihari; Bertram, Albrecht; Krüger, Manja
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst, 1980, Bd. 35.2015, 2, S. 71-79
Peer-reviewed journal article
Mechanical properties and failure probability of compact agglomerates
Russell, Alexander; Schmelzer, Janett; Müller, Peter; Krüger, Manja; Tomas, Jürgen
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 286.2015, S. 546-556
Peer-reviewed journal article
Microstructure, flow behavior, and bulk texture evolution of cold drawn copper-silver composites
Dodla, S.; Thiem, Philipp; Krüger, Manja; Dietrich, D.; Bertram, Albrecht
In: Journal of alloys and compounds - Lausanne: Elsevier, 1991, Bd. 647.2015, S. 519-527
Peer-reviewed journal article
Impact of phase distribution on the fracture toughness of high temperature resistant Mo-Si-B Alloys - Der Einfluss der Phasenverteilung auf die Bruchzähigkeit von hochtemperatur-beständigen Mo-Si-B-Legierungen
Becker, Julia; Krüger, Manja
In: Practical metallography - Berlin: de Gruyter, Bd. 52 (2015), 6, S. 295-313
Peer-reviewed journal article
Polymer-derived ceramics as innovative oxidation barrier coatings for Mo-Si-B alloys
Hasemann, Georg; Baumann, Torben; Dieck, Sebastian; Rannabauer, Stefan; Krüger, Manja
In: Metallurgical and materials transactions / A - Boston: Springer, Bd. 46.2015, 4, S. 1455-1460
Dissertation
Experimental investigations and numerical simulations of lamellar Cu-Ag composites
Dodla, Srihari; Bertram, Albrecht; Krüger, Manja
In: Zugl.: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015: Barleben: Docupoint-Verl., XIX, 130 S., Ill., graph. Darst., 21 cm - (Docupoint Wissenschaft; Micro-macro transactions; 16)
Dissertation
Identification technique of mechanism-based constitutive model for cast iron under thermo-mechanical loads
Ievdokymov, Mykola; Altenbach, Holm; Krüger, Manja
In: Magdeburg Univ., Fak. für Maschinenbau, Diss., 2015, IX, 132 S., graph. Darst.
2014
Book chapter
Der Einfluss der Korngrösse und der Phasenverteilung auf die Bruchzähigkeit von Mo-Si-B-Legierungen
Köppl, Julia; Krüger, Manja
In: 15. Sommerkurs Werkstoffe und Fügen - Magdeburg, 12. und 13. September 2014 , 2014 - Magdeburg : Univ., S. 119-126 Kongress: Sommerkurs Werkstoffe und Fügen 15 Magdeburg 2014.09.12-13
Book chapter
Mikrostruktur und Oxidationsbeständigkeit der Legierung Mo-8,7Si-17,4B
Bolbut, Volodymyr; Hasemann, Georg; Bogomol, Iurii; Loboda, P. I.; Krüger, Manja
In: 15. Sommerkurs Werkstoffe und Fügen - Magdeburg, 12. und 13. September 2014 , 2014 - Magdeburg : Univ., S. 135-142 Kongress: Sommerkurs Werkstoffe und Fügen 15 Magdeburg 2014.09.12-13
Book chapter
APS gespritzte Beschichtung aus Eisenaluminidpulvern unter thermischer und mechanischer Belastung
Thiem, Philipp Georg; Chorny, A.; Smirnov, I.; Krüger, Manja; Halle, Thorsten
In: 15. Sommerkurs Werkstoffe und Fügen - Magdeburg, 12. und 13. September 2014 , 2014 - Magdeburg : Univ., S. 157-164 Kongress: Sommerkurs Werkstoffe und Fügen 15 Magdeburg 2014.09.12-13
Book chapter
Charakterisierung von Verformungszwillingen in Meteoriten und kubisch-raumzentrierten Eisenwerkstoffen mittels Rückstreuelektronenbeugung (EBSD)
Ecke, Martin; Wendt, U.; Heyse, Hartmut; Krüger, Manja
In: 15. Sommerkurs Werkstoffe und Fügen - Magdeburg, 12. und 13. September 2014 , 2014 - Magdeburg : Univ., S. 149-156 Kongress: Sommerkurs Werkstoffe und Fügen 15 Magdeburg 2014.09.12-13
Book chapter
Mikrostruktur und Kriechverhalten einer nah-eutektischen gerichtet erstarrten Mo-Si-B-Legierung
Hasemann, Georg; Bogomol, Iurii; Schliephake, Daniel; Loboda, Petr I.; Krüger, Manja
In: 15. Sommerkurs Werkstoffe und Fügen: Magdeburg, 12. und 13. September 2014 - Magdeburg: Univ., S. 127-134Kongress: Sommerkurs Werkstoffe und Fügen 15 (Magdeburg : 2014.09.12-13)
Book chapter
Oxidationsschutz von Molybdän-Basiswerstoffen durch Beschichtung mit präkeramischen Polymeren
Dieck, Sebastian; Baumann, Torben; Hasemann, Georg; Rannabauer, Stefan; Krüger, Manja
In: 15. Sommerkurs Werkstoffe und Fügen - Magdeburg, 12. und 13. September 2014 - Magdeburg: Univ., S. 143-148, 2014Kongress: Sommerkurs Werkstoffe und Fügen 15 (Magdeburg : 2014.09.12-13)
Book chapter
Werkstoffe
Scheffler, Michael; Halle, Thorsten; Krüger, Manja; Heyn, Andreas
In: Integrated Design Engineering - Ein interdisziplinäres Modell für die ganzheitliche Produktentwicklung / Vajna , Sándor - Berlin, Heidelberg : Springer Vieweg ; Vajna, Sándor *1952-* . - 2014, S. 199-238
Peer-reviewed journal article
Vacancy strengthening in Fe 3Al iron aluminides
Hasemann, Georg; Schneibel, J. H.; Krüger, Manja; George, E. P.
In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Bd. 54.2014, S. 95-103
Peer-reviewed journal article
Microstructure and creep properties of a near-eutectic directionally solidified multiphase Mo-Si-B alloy
Hasemann, Georg; Bogomol, Iurii; Schliephake, Daniel; Loboda, Petr I.; Krüger, Manja
In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Bd. 48.2014, S. 28-33
Peer-reviewed journal article
Correlation between microstructure and properties of fine grained Mo-Mo 3Si-Mo 5SiB 2 alloys
Krüger, Manja; Jain, P.; Kumar, K. S.; Heilmaier, M.
In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Bd. 48.2014, S. 10-18
Peer-reviewed journal article
Characterization of deformation twins in meteorites an dynamically loaded ferrous materials by means of Electron Backscatter Diffraction, EBSD - Charakterisierung von Verformungszwillingen in Meteoriten und dynamisch beanspruchten Eisenwerkstoffen mittels Rückstreuelektronenbeugung, EBSD
Ecke, Martin; Schwarz, Friederike; Krüger, Lutz; Wilke, Markus; Heyse, Hartmut; Wendt, Ulrich; Krüger, Manja
In: Practical metallography - München : Hanser, Bd. 51 (2014), Heft 11, S. 765 - 784
2013
Book chapter
Development of novel metallic high temperature materials by microstructural design
Heilmaier, Martin; Rösler, Joachim; Mukherji, Debashis; Krüger, Manja
In: Microstructural design of advanced engineering materials - Weinheim : Wiley-VCH-Verl. . - 2013, S. 467-494
Peer-reviewed journal article
A study on effect of reactive and rare earth element additions on the oxidation behavior of MoSiB system
Majumdar, Sanjib; Burk, S.; Schliephake, D.; Krüger, Manja; Christ, H.-J.; Heilmaier, M.
In: Oxidation of metals - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 80 (2013), Heft 3/4, S. 219-230
Peer-reviewed journal article
Multiphase Mo-Si-B alloys processed by directional solidification
Krüger, Manja; Hasemann, Georg; Bogomol, Iurii; Loboda, Petr I.
In: MRS online proceedings library / Materials Research Society - Warrendale, Pa. : MRS, Bd. 1516 (2013)
Peer-reviewed journal article
Effects of Zr additions on the microstructure and the mechanical behavior of PM Mo-Si-B alloys
Krüger, Manja; Schliephake, Daniel; Jain, P.; Kumar, K. S.; Schumacher, G.; Heilmaier, M.
In: JOM - New York, NY : Springer Science + Business Media, Bd. 65 (2013), Heft 2, S. 301-306
Book chapter
Polysilazane-type polymer derived ceramic coatings on titanium metal
Smokovych, Iryna; Rannabauer, Stefan; Scheffler, Michael; Hasemann, Georg
In: Effizienz, Präzision, Qualität - 11. Magdeburger Maschinenbau-Tage ; 25. und 26. September 2013 an der OVGU - Magdeburg : Univ. - 2013, Paper B6-3, insgesamt 7 S. Kongress: Magdeburger Maschinenbau-Tage 11 Magdeburg 2013.09.25-26
2012
Book chapter
Vergleichende Untersuchungen zum Rissausbreitungsverhalten von intermetallischen Werkstoffen für Hochtemperaturanwendungen
Krüger, Manja; Dietze, Gabriele; Sturm, Daniel; Schloth, Patrick
In: Fortschritte in der Metallographie - Frankfurt: Inventum . - 2012, S. 161-166
Book chapter
Creep deformation characteristics of Al-rich Ti-Al alloys
Sturm, Daniel; Heilmaier, Martin; Naumenko, Konstantin; Kozhar, Sergii; Krüger, Manja
In: Creep and fracture of engineering materials and structures - proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012 . - 2012, insges. 4 S.Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31)
Book chapter
Deformation and fracture of Mo-silicide alloys at ultrahigh temperatures
Krüger, Manja; Saage, H.; Heilmaier, M.; Jain, P.; Kumar, K. S.
In: Creep and fracture of engineering materials and structures - proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals . - 2012, insges. 4 S.Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31)
Original article in peer-reviewed international journal
The effects of boron addition on the microstructure and mechanical properties of CoRe-based high-temperature alloys
Mukherji, D.; Rösler, J.; Krüger, Manja; Heilmaier, M.; Bölitz, M.-C.; Völkl, R.; Glatzel, U.; Szentmiklósi, L.
In: Scripta materialia. - Oxford : Elsevier, Bd. 66.2012, 1, S. 60-63
Original article in peer-reviewed periodical-type series
Effect of ZR additions on the deformation and fracture behaviour of three phase Mo-Si-B alloys
Krüger, Manja; Saage, Holger; Heilmaier, Martin; Jain, Padam; Kumar, K. Sharvan
In: Non-linear response of conventional & advanced materials, and multi-scale modeling/ International Symposium on Plasticity and Its Current Applications - Fulton, Maryland, USA: NEAT Press, 2012 . - 2012, S. 268-270Kongress: International Symposium on Plasticity and its Current Applications 18 (San Juan, Puerto Rico : 2011.01.03-08)
Original article in peer-reviewed international journal
Dependence of the yield stress of Fe 3Al on heat treatment
Hasemann, Georg; Schneibel, J. H.; George, E. P.
In: Intermetallics. - Barking : Elsevier Science Publ., Bd. 21.2012, 1, S. 56-61
2011
Book chapter
Charakterisierung der mechanischen Eigenschaften einer intermetallischen Fe 3Al-basierten Gusslegierung
Gang, F.; Krüger, Manja; Schneibel, J. H.; Heilmaier, M.
In: 14. Sommerkurs Werkstoffe und Fügen , 2011 - Magdeburg : Universität Magdeburg ; Mook, Gerhard, S. 185-192 Kongress: Sommerkurs Werkstoffe und Fügen 14 Magdeburg 2011.09.23-24
Book chapter
Mechanisches Verhalten von Fe 3Al in Abhängigkeit der vorangegangenen Wärmebehandlung
Hasemann, G.; Schneibel, J. H.; Krüger, Manja; George, E. P.
In: 14. Sommerkurs Werkstoffe und Fügen , 2011 - Magdeburg : Universität Magdeburg ; Mook, Gerhard, S. 201-206 Kongress: Sommerkurs Werkstoffe und Fügen 14 Magdeburg 2011.09.23-24
Book chapter
Der Einfluss des Herstellungsprozesses auf die Eigenschaften von Mo-Si-B-Legierungen
Krüger, Manja; Heilmaier, M.; Shyrska, V.; Loboda, P. I.
In: 14. Sommerkurs Werkstoffe und Fügen , 2011 - Magdeburg : Universität Magdeburg, S. 193-200 Kongress: Sommerkurs Werkstoffe und Fügen 14 Magdeburg 2011.09.23-24
Article in conference proceedings
Dependence of the yield stress of Fe3Al on heat treatment
Hasemann, Georg; Schneibel, J. H.; Krüger, Manja; George, E. P.
In: FeAl2011 - Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Lanzarote (Canary Island), 05 - 07 October 2011 - Madrid, S. 109-112
Article in conference proceedings
Low cycle fatigue behaviour of Fe3Al-based alloys in comparison with cast Al-Si
Krüger, Manja; Gang, F.; Schneibel, J. H.; Wegener, Matthias; Bähr, Rüdiger; Heilmaier, M.
In: FeAl2011 - Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Lanzarote (Canary Island), 05 - 07 October 2011 / [Facultad de Químicas, Universidad Complutense de Madrid. Conference chairperson: Francisco J. Pérez Trujillo] - Madrid, 2011 . - 2011, S. 117-120
Original article in peer-reviewed international journal
Fatigue resistance of Fe 3 Al-based alloys
Gang, Florian; Krüger, Manja; Laskowsky, Alexandra; Rühe, Heike; Schneibel, Joachim H.; Heilmaier, Martin
In: MRS online proceedings library - Warrendale, Pa. : MRS, Bd. 1295 (2011)
Original article in peer-reviewed international journal
Modification of MoSi alloy microstructure by small additions of Zr
Mousa, M.; Wanderka, N.; Timpel, M.; Singh, S.; Krüger, Manja; Heilmaier, M.; Banhart, J.
In: Ultramicroscopy. - New York, NY [u.a.] : Elsevier, Bd. 111.2011, 6, S. 706-710
Original article in peer-reviewed international journal
Oxidation behavior of Mo-Si-B-(X) alloys - macro- and microalloying (X= Cr, Zr, La 2O 3)
Burk, S.; Gorr, B.; Krüger, Manja; Heilmaier, M.; Christ, H.-J.
In: JOM - New York, NY : Springer Science + Business Media, Bd. 63 (2011), Heft 12, S. 32-36
Original article in peer-reviewed international journal
Microstructural and mechanical properties of ternary Mo-Si-B alloys resulting from different processing routes
Krüger, Manja; Heilmaier, Martin; Shyrska, Veronika; Loboda, Petr I.
In: MRS online proceedings library / Materials Research Society - Warrendale, Pa. : MRS, Bd. 1295 (2011)
Original article in peer-reviewed international journal
Phase continuity in high temperature MoSiB alloys - a FIB-tomography study
Hassomeris, O.; Schumacher, G.; Krüger, Manja; Heilmaier, M.; Banhart, J.
In: Intermetallics. - Barking : Elsevier Science Publ., Bd. 19.2011, 4, S. 470-475
Original article in peer-reviewed periodical-type series
Beschreibung der Rissausbreitung in ternären Mo-Si-B-Werkstoffen mittels metallographischer Zielpräparation
Krüger, Manja; Dietze, Gabriele
In: Fortschritte in der Metallographie - Frankfurt [Main] : MAT-INFO, Werkstoff-Informationsges. , 2011 ; Wanner, Alexander, S. 165-170 - (Sonderbände der praktischen Metallographie; 43) Kongress: Metallographie-Tagung 45 Karlsruhe 2011.09.14-16
Peer-reviewed journal article
Temperature dependence of the strength of fine- and ultrafine-grained materials
Schneibel, J. H.; Heilmaier, M.; Blum, W.; Hasemann, Georg; Shanmugasundaram, T.
In: Acta materialia - Amsterdam [u.a.]: Elsevier Science, Bd. 59.2019, 3, S. 1300-1308, 2011
2010
Dissertation
Pulvermetallurgische Herstellung und Charakterisierung von oxidationsbeständigen Molybdänbasislegierungen für Hochtemperaturanwendungen
Krüger, Manja
In: Berlin: Logos, Zugl.: Magdeburg Otto-von-Guericke-Universität, Fakultät für Maschinenbau, Diss., 2010, 185 S., Ill., graph. Darst., 21 cm, ISBN: 978-3-8325-2640-5
Original article in peer-reviewed periodical-type series
Synthesis and characterization of lamellar and fibre-reinforced NiAl-Mo and NiAl-Cr
Haenschke, T.; Gali, A.; Heilmaier, M.; Krüger, Manja; Bei, H.; George, E. P.
In: Journal of physics - Bristol : IOP Publ. , 2004 - 240.2010, Art. 012063, insges. 5 S.
Original article in peer-reviewed periodical-type series
Recent advances in the development of mechanically alloyed Mo silicide alloys
Heilmaier, Martin; Krüger, Manja; Saage, Holger
In: Ductility of bulk nanostructured materials - Stafa-Zurich [u.a.] : ttp, Trans Tech Publ. , 2010 ; Zhao, Yonghao, S. 549-558
Original article in peer-reviewed periodical-type series
Influence of processing on the microstructure and mechanical behaviour of Mo-Si-B alloys
Krüger, Manja; Saage, H.; Heilmaier, M.; Böning, M.; Kestler, H.
In: Journal of physics / Conference series - Bristol : IOP Publ. , 2004 - 240.2010, Art. 012087, insges. 5 S.
2009
Article in conference proceedings
Influence of processing on the microstructure and mechanical properties of Mo-Si-b alloys
Krüger, Manja; Saage, Holger; Heilmaier, M.; Jéhanno, P.; Böning, M.; Kestler, H.; Shyrska, V.; Dudka, A.; Loboda, P.
In: 17th Plansee Seminar 2009 ; Vol. 4 / International Conference on High Performance P-M Materials , 2009 - Reutte - 2009, Art. RM 80 Kongress: Plansee Seminar 17 Reutte 2009.05.25-29
Article in conference proceedings
Mechanical properties of mechanically alloyed Mo-Si-B materials for elevated temperature applications
Krüger, Manja; Saage, Holger; Heilmaier, Martin; Jéhanno, Pascal; Böning, Mike
In: Macro- to -nano-scale inelastic behavior of materials: plasticity, fatigue & fracture - Fulton, Md. : NEAT Press . - 2009 Kongress: International Symposium on Plasticity and its Current Applications 15 St. Thomas 2009.01.03-08
Original article in peer-reviewed international journal
Ductilization of MoSi solid solutions manufactured by powder metallurgy
Saage, H.; Krüger, Manja; Sturm, Daniel; Heilmaier, M.; Schneibel, Joachim H.; George, E.; Heatherly, L.; Somsen, Ch.; Eggelere, G.; Yang, Y.
In: Acta materialia - Kidlington : Elsevier Science, Bd. 57 (2009), Heft 13, S. 3895-3901
Original article in peer-reviewed international journal
Metallic materials for structural applications beyond nickel-based superalloys
Heilmaier, M.; Krüger, Manja; Saage, H.; Rösler, J.; Mukherji, D.; Glatzel, U.; Völkl, R.; Hüttner, R.; Eggeler, G.; Somsen, Ch.; Depka, T.; Christ, H.-J.; Gorr, B.; Burk, S.
In: JOM - New York, NY : Springer Science + Business Media, Bd. 61 (2009), Heft 7, S. 61-67
Original article in peer-reviewed international journal
Microstructures of CoReCr, MoSi and MoSiB high-temperature alloys
Depka, T.; Somsen, Ch.; Eggeler, G.; Mukherji, D.; Rösler, J.; Krüger, Manja; Saage, H.; Heilmaier, M.
In: Materials science & engineering - Amsterdam [u.a.] : Elsevier, Bd. 510/511 (2009), S. 337-341
Original article in peer-reviewed periodical-type series
Current status of Mo-Si-B silicide alloys for ultra-high temperature applications
Heilmaier, Martin; Saage, Holger; Krüger, Manja; Jehanno, Pascal; Böning, Mike; Kestler, Heinrich
In: Advanced intermetallic-based alloys for extreme environment and energy applications - Warrendale, Pa. : MRS , 2009 ; Palm, Martin - 2009, Paper-Nr. 1128-U07-07 - (Materials Research Society symposium proceedings; 1128) Kongress: MRS fall meeting Boston, Mass. 2008.12.01-04
2008
Book chapter
Mo-Mo 5SiB 2-Mo 3Si alloys resistant to high temperature oxidation
Jéhanno, P.; Böning, M.; Kestler, H.; Heilmaier, Martin; Krüger, Manja
In: Proceedings of the 7th International Conference on Tungsten, Refractory and Hardmaterials 2008. - Washington, S. 921-931Kongress: International Conference on Tungsten, Refractory and Hardmaterials; 7 (Washington, DC) : 2008.06.08-12
Book chapter
Subsurface imaging using moving electromagnetic fields and surface acoustic waves
Mook, Gerhard; Michel, Fritz; Simonin, Juri; Krüger, Manja; Luther, Mathias
In: Emerging technologies in non-destructive testing . - London [u.a.] : Taylor & Francis, ISBN 978-0-415-46476-5, S. 275-280, 2008Kongress: ETNDT; 4 (Stuttgart) : 2007.04.02-04
Book chapter
Enhanced plasticity of mechanically alloyed Mo-based materials for high temperature applications
Krüger, Manja; Saage, Holger; Heilmaier, Martin; Jéhanno, Pascal; Böning, Mike
In: Mechanics & mechanisms of finite plastic deformation. - Fulton, Md. : NEAT Press, S. 193-195, 2008Kongress: International Symposium on Plasticity and its Current Applications; 14 (Kona, Hawaii) : 2008.01.03-08
Original article in peer-reviewed international journal
Mechanically alloyed Mo-Si-B alloys with continuous a-Mo matrix and improved mechanical proberties
Krüger, Manja; Franz, S.; Saage, Holger; Heilmaier, Martin; Schneibel, J. H.; Jéhanno, P.; Böning, M.; Kestler, H.
In: Intermetallics . - Barking : Elsevier Science Publ., Bd. 16.2008, 7, S. 933-941
Original article in peer-reviewed international journal
Molybdenum alloys for high temperature applications in air
Jéhanno, P.; Böning, M.; Kestler, H.; Heilmaier, Martin; Saage, Holger; Krüger, Manja
In: Powder metallurgy . - London, Bd. 51.2008, 2, S. 99-102
2007
Book chapter
Detektion von Defekten in adaptiven CFK-Laminaten mittels bildgebender Laservibrometrie
Krüger, Manja; Mook, Gerhard
In: 13. Sommerkurs Werkstoffe und Fügen/ Sommerkurs Werkstoffe und Fügen - Magdeburg: Univ. . - 2007, S. 224-235
Book chapter
Mo-based silicide alloys with balanced oxidation resistance and mechanical properties
Jéhanno, P.; Böning, M.; Kestler, H.; Heilmaier, Martin; Saage, Holger; Krüger, Manja
In: Advances in powder metallurgy & particulate materials - 2007 ; Vol. 2 - Princeton, NJ: Metal Powder Industries Fed.; Engquist, John Vol. 2 . - 2007, S. 8140-8148Kongress: PowderMet (Denver, Colo. : 2007.05.13-16)
Book chapter
Subsurface imaging using moving electromagnetic fields and surface acoustic waves
Mook, Gehard; Michel, Fritz; Simonin, Jouri; Krüger, Manja; Luther, M.
In: 13. Sommerkurs Werkstoffe und Fügen/ Sommerkurs Werkstoffe und Fügen - Magdeburg: Univ.; Mook, Gerhard . - 2007, S. 217-223
Book chapter
Mechanisches Legieren von Molybdän-Basislegierungen für Hochtemperaturanwendungen
Krüger, Manja; Saage, Holger; Franz, S.; Heilmaier, Martin
In: 13. Sommerkurs Werkstoffe und Fügen/ Sommerkurs Werkstoffe und Fügen - Magdeburg: Univ. . - 2007, S. 10-21
Peer-reviewed journal article
Current status and future trends of mo-based silicide alloys for ultra-high temperature applications
Heilmayer, Martin; Saage, Holger; Krüger, Manja; Jehanno, P.; Böning, M.; Kestler, H.; Drawin, S.
In: Current topics on high temperature materials - [S.l.] . - 2007, S. 245-259 - (JSPS report of the 123rd Committee on Heat Resisting Materials and Alloys; 48.2007,3 Special issue)
2006
Non-peer-reviewed journal article
Detektion von Defekten in adaptiven CFK-Laminaten mittels bildgebender Laservibrometrie
Krüger, Manja; Mook, Gerhard
In: ZfP-Zeitung . - Berlin, 99, S. 36-41